Spyware.SolidKeyLogger

SUMMARY

Behavior

Spyware.SolidKeyLogger is a spyware program that logs keystrokes and sends them to a configurable email address. It can operate in stealth mode.

Symptoms

One or more files detected as Spyware.SolidKeyLogger.

Transmission

This risk must be manually installed.

Protection

• Initial Rapid Release version March 1, 2006
• Latest Rapid Release version pending
• Initial Daily Certified version March 1, 2006
• Latest Daily Certified version March 1, 2006
• Initial Weekly Certified release date March 1, 2006

Click here for a more detailed description of Rapid Release and Daily Certified virus definitions.

TECHNICAL DETAILS

Once Spyware.SolidKeyLogger is installed, it performs the following actions:

1. Creates the following files:
   
   
   • %SystemDrive%\Documents and Settings\All Users\Start Menu\Programs\Solid Key Logger\OverSpy on the Web.lnk
   • %SystemDrive%\Documents and Settings\All Users\Start Menu\Programs\Solid Key Logger\Solid Key Logger on the Web.lnk
   • %SystemDrive%\Documents and Settings\All Users\Start Menu\Programs\Solid Key Logger\Solid Key Logger.lnk
   • %SystemDrive%\Documents and Settings\All Users\Start Menu\Programs\Solid Key Logger\Uninstall Solid Key Logger.lnk
   • %ProgramFiles%\Solid Key Logger\Config.xml
   • %ProgramFiles%\Solid Key Logger\config.~xml
   • %ProgramFiles%\Solid Key Logger\Hook.dll
   • %ProgramFiles%\Solid Key Logger\OverSpy.url
   • %ProgramFiles%\Solid Key Logger\Solid Key Logger.url
   • %ProgramFiles%\Solid Key Logger\SolidKeyLogger.exe
   • %ProgramFiles%\Solid Key Logger\unins000.dat
   • %ProgramFiles%\Solid Key Logger\unins000.exe
   • %ProgramFiles%\Solid Key Logger\UninsHs.dat
   • %ProgramFiles%\Solid Key Logger\UninsHs.exe
   • %System%\RecoveryInfo\Cache
   • %System%\RecoveryInfo\Cache\clpbrd
   • %System%\RecoveryInfo\Cache\kystrk
   • %System%\RecoveryInfo\Cache\pswd
   • %System%\RecoveryInfo\Cache\scrcptr
   • %System%\RecoveryInfo\Cache\wnktns
   • %System%\RecoveryInfo\Cache\xplr
   • %System%\HookNTQSI.dll (This is a non-malicious component that may be used by other legitimate programs.)
   • %UserProfile%\Application Data\Microsoft\Internet Explorer\Quick Launch\Solid Key Logger.lnk
   • %UserProfile%\Desktop\Solid Key Logger.lnk
     
     Notes:
   • %SystemDrive% is a variable that refers to the drive on which Windows is installed. By default, this is drive C.
   • %ProgramFiles% is a variable that refers to the program files folder. By default, this is C:\Program Files.
   • %System% is a variable that refers to the System folder. By default this is C:\Windows\System (Windows 95/98/Me), C:\Winnt\System32 (Windows NT/2000), or C:\Windows\System32 (Windows XP).
   • %UserProfile% is a variable that refers to the current user's profile folder. By default, this is C:\Documents and Settings\[CURRENT USER] (Windows NT/2000/XP).
     
     
2. Creates the following registry subkeys:
   
   HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{E0707FC1-858A-FEAA-3DA7-FF895EED2C75}
   HKEY_LOCAL_MACHINE\SOFTWARE\Licenses\{K7C0DB872A3F777C0}
   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Solid Key Logger_is1
   HKEY_ALL_USERS\Software\Virtuoza\Solid Key Logger
   
   
3. Adds the value:
   
   "Solid Key Logger" = ""%ProgramFiles%\Solid Key Logger\SolidKeyLogger.exe" minimized"
   
   to the registry subkey:
   
   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
   
   so that it runs every time Windows starts.
   
   
4. Adds the values:
   
   "{I16368956CF7437B5}" = "06 00 00 00"
   "{016368956CF7437B5}" = "56 3E A8 0E 0B A2 A7 A6 41 06 53 98 0D B9 44 A3 ED 32 92 66 BC B6 01 AB 99 E8 09 9B 01 B1 52 3D 7E E3 0B 3D 71 C8 79 79 C2 A3 33 5B 45 E7 43 79 52 F4 89 4F F2 85 97 A6 75 37 5F 7B B7 2C 86 1B 22 9C 32 79 34 B9 D3 2D 93 10 1D AC 7E 5D 6F 8B 70 0A EF A3 1C AE BC 92 C6 43 16 8B 46 A4 53 43 64 29 44 C3 95 4D 2C FE D0 10 5E 60 24 A3 E0 7C 3F 70 66 9B 01"
   "{K7C0DB872A3F777C0}" = "[RANDOM VALUE]"
   "{R7C0DB872A3F777C0}" = "[RANDOM VALUE]"
   
   to the registry subkey:
   
   HKEY_LOCAL_MACHINE\SOFTWARE\Licenses
   
   
5. Modifies the value:
   
   "DisableTaskMgr" = "0"
   
   in the following registry entry:
   
   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System
   
   in order to enable the Disable Task Manager group policy, so that users cannot run the Task Manager.
   
   
6. Logs keystrokes and sends the information it gathers to a configurable email address. The risk can be configured to run in stealth mode. It also has a control panel that can be displayed with a configurable hotkey combination, the default combination is CTRL-SHIFT-K. Also, a password can be set to access the control panel and to encrypt log files.
   
   Note: The demonstration version of this risk only logs keystrokes. The full version can also monitor the contents of the clipboard and capture periodic screenshots.

REMOVAL

The following instructions pertain to all Symantec antivirus products that support security risk detection.

1. Update the definitions.
2. Run a full system scan.
3. Delete any values added to the registry.
   

For specific details on each of these steps, read the following instructions.

1. To update the definitions
To obtain the most recent definitions, start your Symantec program and run LiveUpdate.


2. To run the scan

1. Start your Symantec antivirus program, and then run a full system scan.
   
2. If any files are detected, and depending on which software version you are using, you may see one or more of the following options:
   
   Note: This applies only to versions of Norton AntiVirus that support security risk detection. If you are running a version of Symantec AntiVirus Corporate Edition that supports security risk detection, and security risk detection has been enabled, you will only see a message box that gives the results of the scan. If you have questions in this situation, contact your network administrator.
   
   • Exclude (Not recommended): If you click this button, it will set the risk so that it is no longer detectable. That is, the antivirus program will keep the security risk on your computer and will no longer detect it to remove from your computer.
     
     
   • Ignore or Skip: This option tells the scanner to ignore the risk for this scan only. It will be detected again the next time that you run a scan.
     
     
   • Cancel: This option is new to Norton Antivirus 2005. It is used when Norton Antivirus 2005 has determined that it cannot delete a security risk. This Cancel option tells the scanner to ignore the risk for this scan only, and thus, the risk will be detected again the next time that you run a scan.
     
     To actually delete the security risk:
     • Click its file name (under the Filename column).
     • In the Item Information box that displays, write down the full path and file name.
     • Then use Windows Explorer to locate and delete the file.
       
       
   • Delete: This option will attempt to delete the detected files. In some cases, the scanner will not be able to do this.
     • If you see a message, "Delete Failed" (or similar message), manually delete the file.
     • Click the file name of the risk that is under the Filename column.
     • In the Item Information box that displays, write down the full path and file name.
     • Then use Windows Explorer to locate and delete the file.
       
       

Important: If you are unable to start your Symantec antivirus product or the product reports that it cannot delete a detected file, you may need to stop the risk from running in order to remove it. To do this, run the scan in Safe mode. For instructions, read the document, How to start the computer in Safe Mode. Once you have restarted in Safe mode, run the scan again.

After the files are deleted, restart the computer in Normal mode and proceed with the next section.

Warning messages may be displayed when the computer is restarted, since the risk may not be fully removed at this point. You can ignore these messages and click OK. These messages will not appear when the computer is restarted after the removal instructions have been fully completed. The messages displayed may be similar to the following:

Title: [FILE PATH]
Message body: Windows cannot find [FILE NAME]. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.

3. To delete the value from the registry
Important: Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified subkeys only. Read the document: How to make a backup of the Windows registry.

1. Click Start > Run.
2. Type regedit
   
   Then click OK.
   
   Note: If the registry editor fails to open the risk may have modified the registry to prevent access to the registry editor. Security Response has developed a tool to resolve this problem. Download and run this tool, and then continue with the removal.
   
   
3. Navigate to the subkey:
   
   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
   
   
4. In the right pane, delete the value:
   
   "Solid Key Logger" = ""%ProgramFiles%\Solid Key Logger\SolidKeyLogger.exe" minimized"
   
   
5. Navigate to and delete the subkeys:
   
   HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{E0707FC1-858A-FEAA-3DA7-FF895EED2C75}
   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Solid Key Logger_is1
   HKEY_ALL_USERS\Software\Virtuoza\Solid Key Logger
   
   
6. Navigate to the subkey:
   
   HKEY_LOCAL_MACHINE\SOFTWARE\Licenses
   
   
7. In the right pane, delete the values:
   
   "{I16368956CF7437B5}" = "06 00 00 00"
   "{016368956CF7437B5}" = "56 3E A8 0E 0B A2 A7 A6 41 06 53 98 0D B9 44 A3 ED 32 92 66 BC B6 01 AB 99 E8 09 9B 01 B1 52 3D 7E E3 0B 3D 71 C8 79 79 C2 A3 33 5B 45 E7 43 79 52 F4 89 4F F2 85 97 A6 75 37 5F 7B B7 2C 86 1B 22 9C 32 79 34 B9 D3 2D 93 10 1D AC 7E 5D 6F 8B 70 0A EF A3 1C AE BC 92 C6 43 16 8B 46 A4 53 43 64 29 44 C3 95 4D 2C FE D0 10 5E 60 24 A3 E0 7C 3F 70 66 9B 01"
   "{K7C0DB872A3F777C0}" = "[RANDOM VALUE]"
   "{R7C0DB872A3F777C0}" = "[RANDOM VALUE]"
   
   
8. Navigate to the subkey:
   
   HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System
   
   
9. In the right pane, reset the following value if required:
   
   "DisableTaskMgr" = "1"
   
   
10. Exit the Registry Editor.